My setup

Connect to the heltec with ethernet on base station initially

User: root

Pass: heltec.org

IDs, Names, and Info (base station and BS HELTEC)

MeshID: Mesh-0

Operating Frequency: 8 MHz, Channel 44

Traffic mode: None

SSID: HT-H7608-C484

HELTEC Static IP: 172.2.31.1 Base Station IP: 172.2.31.2 (ran ip -br addr then sudo ip addr add 172.2.31.2/24 dev enx00e04c681131)

172.2.31.20/24 for the wi-fi network (set it up in ubuntu wifi settings)

Pass: heltec.org

IDs, Names, and Info (on boat HELTEC)

MeshID: Mesh-0

Operating Frequency: 8 MHz, Channel 44

Traffic mode: None

SSID: HT-H7608-BB24

HELTEC Static IP: 172.2.31.3

Raspberry Pi Static IP: 172.2.31.4

Pass: heltec.org

Raspberry Pi

Static IP: 172.2.31.4

User: mtuser

Pass: boats0519

All the credentials used to set up qix and the docker and what not are currently just mine (Will McConnell) please don’t steal my data

Documentation:

https://file.notion.com/f/f/fc7eab3f-6f97-4f43-a115-8ba144983d1a/81dd1043-673d-4951-ae05-5ec44811cf66/HELTEC_set_up_steps_NEW.pdf?table=block&id=2a04d4ef-b4c7-80bc-9fe2-fdfeb2c5e241&spaceId=fc7eab3f-6f97-4f43-a115-8ba144983d1a&expirationTimestamp=1792022400000&signature=MY7e4QKYsCZaIm-O0v1EYgOlA5jc1kHKUA1AMWKwBps&downloadName=HELTEC+set+up+steps+NEW.pdf

‣

‣